Spouse 30 years younger: how the joint table lowers your RMD

IRA owners

An owner of 75 whose spouse is the age gap in the title younger divides by 41.3 instead of 24.6: on $500,000 the RMD is $12,106.54 rather than $20,325.20, $8,218.66 less.

Choosing the Right Divisor Table

An IRA owner whose spouse is more than ten years younger and remains the sole beneficiary throughout the year uses the Joint and Last Survivor Table. This choice replaces the standard Uniform Lifetime Table. The joint table assigns a larger divisor to the owner's age. A larger divisor results in a smaller annual withdrawal amount. The key figures above demonstrate this difference clearly. At the specified age, the joint divisor exceeds the uniform divisor. Consequently, the calculated distribution is lower when using the joint method. Readers can verify these calculations using the RMD calculator. The table below illustrates how the divisor changes across different age combinations. It shows the specific impact on a fixed account balance. This mechanism ensures the distribution reflects the combined life expectancy of both spouses.

IRS Joint and Last Survivor Table (26 CFR 1.401(a)(9)-9, Table 3)
Owner's ageSpouse's ageJoint divisorRMD on $500,000 ($)
734343.211,574.07
754541.312,106.54
805036.513,698.63
855531.815,723.27

Impact on Annual Withdrawals

The difference between the two tables becomes significant for larger balances. Using the joint table reduces the required minimum distribution compared to the uniform table. The key figures show the exact reduction for the example provided. This reduction allows more funds to remain in the retirement account. The table above lists divisors for various age gaps. Each row compares the joint divisor against the resulting distribution amount. The joint divisor is consistently larger than the uniform divisor for these ages. This leads to a lower calculated withdrawal. The savings accumulate over multiple years. Readers should note that the spouse must remain the sole beneficiary. If the beneficiary status changes, the calculation method may change. The joint table applies only under specific conditions.

Understanding the Calculation Method

The calculation divides the account balance by the applicable divisor. The joint table provides a divisor based on the ages of both spouses. This differs from the uniform table, which uses only the owner's age. The joint divisor reflects the longer combined life expectancy. A longer life expectancy means smaller annual withdrawals. The table above shows this relationship for several age pairs. The divisor increases as the age gap widens. This increase lowers the required distribution amount. The methodology page explains how these figures are derived. It details the actuarial basis for the tables. The process remains consistent for all eligible accounts. No additional adjustments are needed for the calculation itself.

Questions

Which table applies if my spouse is younger?

Use the Joint and Last Survivor Table if your spouse is more than ten years younger and is your sole beneficiary for the entire year. Otherwise, use the Uniform Lifetime Table.

How does the joint divisor affect my withdrawal?

The joint divisor is larger than the uniform divisor. Dividing your balance by a larger number results in a smaller required minimum distribution for the year.

Does the age gap change the calculation?

Yes. The joint divisor depends on the ages of both spouses. A wider age gap typically results in a larger divisor and a smaller annual withdrawal amount.

Where can I find the specific divisors?

Consult the Joint and Last Survivor Table for exact figures. The RMD calculator also provides quick estimates based on your specific ages and account balance.

Every figure on this page is computed by code from the IRS Uniform Lifetime and Single Life tables (Publication 590-B and 26 CFR 1.401(a)(9)-9). See the methodology.

Updated: