Spouse 13 years younger: how the joint table lowers your RMD
IRA owners
An owner of 75 whose spouse is the age gap in the title younger divides by 26.8 instead of 24.6: on $500,000 the RMD is $18,656.72 rather than $20,325.20, $1,668.48 less.
- 26.8joint divisor at 75
- $18,656.72RMD with the joint table
- $1,668.48less than the Uniform table
When the joint table applies
An IRA owner uses the Joint and Last Survivor Table only if specific conditions are met. The spouse must be more than ten years younger than the owner. That spouse must also be the sole beneficiary for the entire year. If either condition fails, the standard Uniform Lifetime Table applies. The joint table produces a longer divisor. A longer divisor reduces the calculated withdrawal amount. The key figures above show this reduction for the example balance. The table below lists divisors and resulting amounts for several ages. Use the RMD calculator to check your own figures. The logic remains the same regardless of the balance size.
| Owner's age | Spouse's age | Joint divisor | RMD on $500,000 ($) |
|---|---|---|---|
| 73 | 60 | 28.6 | 17,482.52 |
| 75 | 62 | 26.8 | 18,656.72 |
| 80 | 67 | 22.3 | 22,421.52 |
| 85 | 72 | 18.1 | 27,624.31 |
Reading the divisor difference
The comparison at the owner's age shown in the key figures illustrates the mechanism clearly. The joint divisor exceeds the Uniform Lifetime divisor. Because the divisor is larger, the resulting distribution is smaller. The table above confirms this pattern across other ages. The gap between the two divisors varies by age. It is not a fixed percentage difference. The spouse's age relative to the owner drives the joint divisor value. A younger spouse generally yields a larger joint divisor. This results in a lower required distribution for the same account balance. The table above shows how these values shift as the owner ages.
Calculating the impact on withdrawals
The difference in the required distribution equals the balance divided by the joint divisor, subtracted from the balance divided by the uniform divisor. The key figures above quantify this difference for the example. The joint table consistently produces a lower obligation than the uniform table when the eligibility rules are satisfied. This lower obligation is the direct result of the larger divisor. The table above provides the specific divisors needed to replicate these calculations for other ages. The reduction in the withdrawal amount is proportional to the account balance. A larger balance yields a larger absolute reduction. The table above helps visualize this relationship across different owner ages.
Verifying eligibility and deadlines
Confirm the spouse's age and beneficiary status before relying on the joint table. The spouse must remain the sole beneficiary throughout the tax year. If the spouse dies or the beneficiary status changes, the uniform table may apply retroactively. The first distribution is due by the first of April of the following year. Subsequent distributions are due by the end of each year. Use the RMD calculator to verify the correct table for your situation. The table above serves as a reference for the divisor values used in these calculations. Accuracy in determining the correct table prevents over- or under-withdrawing.
Questions
What is the main benefit of using the joint table?
The joint table provides a larger divisor than the Uniform Lifetime Table. This larger divisor results in a smaller required minimum distribution for the same account balance. The key figures above illustrate this reduction.
Does the spouse's age affect the divisor?
Yes. The joint divisor depends on both the owner's age and the spouse's age. A spouse more than ten years younger typically yields a larger joint divisor. The table above shows these variations.
What happens if the spouse is not the sole beneficiary?
If the spouse is not the sole beneficiary for the entire year, the Uniform Lifetime Table applies. The joint table is only used when the spouse meets both the age and beneficiary requirements.
Where can I find the specific divisor values?
The table above lists the joint divisors for various owner and spouse ages. You can also use the RMD calculator to determine the correct divisor for your specific ages and balance.
Every figure on this page is computed by code from the IRS Uniform Lifetime and Single Life tables (Publication 590-B and 26 CFR 1.401(a)(9)-9). See the methodology.